7″ capacitive touchscreen – larger screen allows for larger buttons and controls; easier to see and use
One-touch arming – Arm button on home screen for one-touch arming
Capacitive-touch buttons – Home, Emergency
5-day weather forecast – get your workweek forecast in one glance
Create Rooms – Group Smart Home devices for easy control of multiple devices in one screen
Bookmark screen – create your own home screen for most common features
100 Wireless Zones – More than any other all-in-one panel
2 Wired Zones
Multiple Partitions Available
Give users a name, not just a number, and assign individual schedules
Individual User Codes and Audit Trail
Integrated Z-Wave radio – no extra costs to enable the most popular home automation technology on the market
Supports up to 232 Z-Wave devices
Lighting controls, light bulbs, door locks, thermostats
Create and execute scenes – define what Z-Wave devices should do when the scene button is pressed
Add 2GIG Notification Sensors and Intrusion Sensors for added peace of mind by protecting against unattended grills, open pool gates, gun movement, water leaks and other scenarios
User-replaceable cell radio with integrated antenna
Door & Window Contacts
The Thin Door/Window Contact and Recessed Door/Window Contact are designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.
The 2GIG Passive Infrared Motion Detector is a wall-mounted unit with wide-angle motion protection. It communicates with the control panel using the 345 MHz frequency. When set to High (HI) Sensitivity Mode, the PIR has a maximum range of 30 ft deep x 50 ft wide (9.1 m x 15.2 m). The PIR’s pet-immune feature can be set to tolerate animals up 55 lbs.
Dual element sensor with 30 ft. by 50 ft. range
33 or 55 lb. pet immune
90-degree look down
3 different mounting brackets
Glass Break Detector
The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.
Monitors for the sound of breaking glass
Two test LEDs
Dual shatter recognition technology
Smoke, Heat, Freeze Detector
Smoke detector with integrated heat and freeze sensors
Ability to separate the 3 detection features
35' protection area
Freeze detector activates below 41 degrees
Heat detector activates above 135 degrees
345 MHz sends supervisory signal every 70 minutes
Supervised transmitter and status LED
Carbon Monoxide Sensor
The Wireless Carbon Monoxide Alarm is a 3V battery powered wireless detector intended for use with wireless alarm systems. The detector consists of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm communicates with the Control Panel and can send alarm, tamper and battery condition messages to the system’s receiver.
Built-in 85 decibel sounder
Tamper protected case
Full monitoring of alarm, low battery, and tamper conditions
The 2GIG Outdoor Wireless Contact Sensor expands the reach of security systems to outdoor areas, providing notification when outdoor gates or doors are opened. Able to handle harsh temperature conditions, this sensor is ideal for wide gaps when a typical contact sensor is insufficient.
Sends a notification to the alarm panel when a door, gate or window is opened or closed.
Can be painted to match its mounting surface.
Wireless Signal Range: 350 ft (106.7m), open air with Wireless Control Panel